* Fast Paths for Installing and Managing the System
*** Managing Graphic Input Devices (input)
***** Keyboard (keyboard)
******* Change/Show Characteristics of the Keyboard(chgkbd)
******* Work with LFT Software Keyboard (keymap)
********* List Current Software Keyboard Map for LFT ()
********* Change the Keyboard Map for the Next System Restart (chkbd)
******* Generate an Error Report (errpt)
******* Trace the Keyboard (trace_link)
********* Start Trace (trcstart)
********* Stop Trace (trcstop)
********* Generate a Trace Report (trcrpt)
***** Mouse (mouse)
******* Generate an Error Report (errpt)
******* Trace the Mouse (trace_link)
********* Start Trace (trcstart)
********* Stop Trace (trcstop)
********* Generate a Trace Report (trcrpt)
***** Dials/LPF Keys (dials)
******* # List all Defined Dials/LPF Keys (lsdials)
******* Add a Dials/LPF Keys (makdials)
******* Change/Show Characteristics of a Dials/LPF Keys (chdials)
******* Remove a Dials/LPF Keys(rmdials)
******* Configure a Defined Dials/LPF Keys (cfgdials)
******* Generate an Error Report (errpt)
******* Trace a Dials/LPF Keys(trace_link)
********* Start Trace (trcstart)
********* Stop Trace (trcstop)
********* Generate a Trace Report (trcrpt)
***** Tablet (tablet)
******* # Generate an Error Report (errpt)
******* Trace a Dials/LPF Keys(trace_link)
********* Start Trace (trcstart)
********* Stop Trace (trcstop)
********* Generate a Trace Report (trcrpt)
***** Spaceball(TM) (spaceball)
******* Add a Spaceball (mksball)
******* Remove a Spaceball (rmsball)
***** Wacom (TM) Serial Tablet (wacom_tablet)
******* Add a Wacom (mkwacom)
******* Remove a Wacom (rmwacom)
***** 6093 Serial Tablet (6093_tablet)
******* Add a 6093 (mk6093)
******* Remove a 6093 (rm6093)

*** Managing the Low Function Terminal (LFT) (lft)
***** Software Keyboard (keymap)
******* List Current Software Keyboard Map for LFT (lskbd)
******* Change the Keyboard Map for the Next System Restart (chkbd)
***** Displays (display)
******* List All Displays Available to the LFT (lsdisp)
******* Move the LFT to Another Display (chdisp)
******* Display Power Management (display_pm_select)
******* Generate an Error Report (errpt)
********* Start Trace (trcstart)
********* Stop Trace (trcstop)
********* Generate a Trace Report (trcrpt)
******* Trace a Display (trace_link)
***** Fonts (font)
******* List All Fonts in the System (lsfont)
******* Select the Active Font for Next System Restart (chfont)
******* Add a Font to the System (mkfont)
*** Managing the System Environment (system)
***** Stop the System (shutdown)
***** Assign the Console (chcons)
***** Change/Show Date, Time, and Time Zone (chtz)
***** Manage Language Environment (mlang)
***** Change/Show Characteristics of Operating System (chgsys)
***** Change/Show Number of Licensed Users (chlicense)
***** Broadcast Message to All Users (wall)
***** Manage System Logs (logs)
***** System Dump (dump_link)
***** Change System User Interface (dtconfig)
*** Managing the System Performance (performance)
***** Resource Status and Monitors (monitors)
***** Analysis Tools (analysis)
***** Resource Controls (controls)
***** Schedule Jobs (at)
***** Power Management (pm)
*** Managing the System Problems (problem)
***** Error Log (error)
***** Trace (trace)
***** System Dump (dump)
***** Alog (alog)
***** Hardware Diagnostics (diag)
***** Verify Software Requisites and Installations (lppchk)
*** Managing Storage and File Systems (storage)
***** Logical Volume Manager (lvm)
***** File Systems (fs)
***** Files and Directories (filemgr)
***** Removable Disk Management (rds)
***** System Backup Manager (backsys)
*** Managing Printers (printer)
***** List All Defined Printers/Plotters (lsdprt)
***** List All Supported Printers/Plotters (lssprt)
***** Add a Printer/Plotter (makprt)
***** Move a Printer/Plotter to Another Port (movprt)
***** Change/Show Characteristics of a Printer/Plotter (chgprt)
***** Remove a Printer/Plotter (rmvprt)
***** Configure a Defined Printer/Plotter (cfgprt)
***** Install Additional Printer/Plotter Software (printerinst)
***** Generate an Error Report (errpt)
***** Trace a Printer/Plotter (trace_link)
*** Managing Print Jobs and Queues (print)
***** Start a Print Job (qprt)
***** Manage Print Jobs (jobs)
***** List All Print Queues (spooler)
***** Manage Print Queues (pqmanage)
***** Add a Print Queue (mkpq)
***** Add an Additional Printer to an Existing Print Queue (ps_mkpq_attachName)
***** Change/Show Print Queue Characteristics (chpq)
***** Change/Show Printer Connection Characteristics (chprtcom)
***** Remove a Print Queue (rmpq)
***** Manage Print Server (server)
***** Programming Tools (pqtools)
* Fast Paths for Managing Networks
*** Network File System (_nfs)
***** Configure NFS on This System (nfsconfigure)
***** Add a Directory to Exports List (mknfsexp)
***** Change/Show Attributes of an Exported Directory (chnfsexp)
***** Remove a Directory from Exports List (rmnfsexp)
***** Add a File System for Mounting (mknfsmnt)
***** Change/Show Attributes of an NFS File System (chnfsmnt)
***** Remove an NFS File System (rmnfsmnt)
*** Network Information Service (NIS) (yp)
***** Change NIS Domain Name of this Host (chypdom)
***** Configure/Modify NIS (ypconfigure)
***** Start/Stop Configured NIS Daemons (ypstartstop)
***** Manage NIS Maps (ypmaps)
*** Configure Secure NFS & NIS (rpc)
***** Start Keyserv Daemon (mkkeyserv)
***** Stop Keyserv Daemon (rmkeyserv)
***** Add/Change Keys for Users (newkey)
*** DCE (Distributed Computing Environment) (dce)
***** Configure TCP/IP (If Not Already Configured) (dce_to_tcpip)
***** Configure DCE/DFS (mkdce)
***** DCE Security & Users Administration (dcesecadmin)
***** CDS (Cell Directory Service) Administration (dcecdsadmin)
***** DTS (Distributed Time Service) Administration (dtsadmin)
***** RPC (Remote Procedure Call) Administration (rpc_maint)
***** DFS (Distributed File Service) Administration (dfsadmin)
***** Stop DCE/DFS Daemons (stopdce)
***** Restart DCE/DFS Daemons (restartdce)
***** Register Cell Globally (mkdceregister)
***** Unregister Cell Globally (rmdceregister)
***** Unconfigure DCE/DFS (rmdce)
*** Host name (hostname)
***** Set the Hostname (mkhostname)
***** Show a Hostname (lshostname)
*** Select BSD-Style rc Configuration (setbootup_option)
*** Static Routes (route)
***** List All Routes (lsroute)
***** Add a Static Route (mkroute)
***** Remove a Static Route (rmroute)
***** Flush Routing Table (fshrttbl)
*** Network Interfaces (netinterface)
***** Network Interface Selection (inet)
******* List All Network Interfaces (lsinet)
******* Add a Network Interface (mkinet)
********* Add a Standard Ethernet Network Interface (mkineten)
********* Add an IEEE 802.3 Network Interface (mkinetet)
********* Add a Token-Ring Network Interface (mkinettr)
********* Add a Serial Line INTERNET Network Interface (mkinetsl)
********* Add a Serial Optical Network Interface (mkinetso)
********* Add an IBM 370 Channel Attach Network Interface (mkinetca)
********* Add a FDDI Network Interface (mkinetfi)
******* Change/Show Characteristics of a Network Interface (chinet, shinet)
******* Remove a Network Interface (rminet)
***** Network Interface Drivers (chif)

*** Name Resolution (namerslv)
***** Domain Nameserver (resolvconf, resolv.conf)
******* Start Using the Nameserver (stnamerslv)
********* Restore a Copy of /etc/resolv.conf File (stnamerslv1)
********* Create a New /etc/resolv.conf File (stnamerslv2)
******* List all Nameservers (lsnamerslv)
******* Add a Nameserver (mknamerslv)
******* Remove a Nameserver (rmnamerslv)
******* Stop Using a Nameserver (spnamerslv)
******* Set/Show the Domain (mkdomain)
******* Remove the Domain (rmdomain)
***** Hosts Table (hosts, hostent)
******* List All Hosts (lshostent)
******* Add a Host (mkhostent)
******* Change/Show Characteristics of a Host (chhostent)
******* Remove a Host (rmhostent)
*** Client Network Services (clientnet)
***** Services
******* List All Services (lsservices)
******* Add a Service (mkservices)
******* Change/Show Characteristics of a Service (chservices, shservices)
******* Remove a Service (rmservices)
***** Syslog (information only)
***** Protocols (information only)
*** Server Network Services (servernet, ruser)
***** Remote Access (rmtaccess)
******* Host access (hostsequiv, hosts.equiv)
********* List All Remote Hosts (lshostsequiv)
********* Add a Remote Host (mkhostsequiv)
********* Remove a Remote Host (rmhostsequiv)
******* Restrict File Transfer Program Users (ftpusers)
********* Show All Restricted Users (lsftpusers)
********* Add a Restricted User (mkftpusers)
********* Remove a Restricted User (rmftpusers)
***** Other Available Services (otherserv)
******* Super Daemon (inetd)
********* inetd Subsystem (inetdsubsys)
*********** Start Using the inetd Subsystem (mkinetd)
************* NOW (mkinetd_now)
************* Next System RESTART (mkinetd_boot)
************* BOTH Now and at System Restart (mkinetd_both)
*********** Change/Show Restart Characteristics of inetd Subsystem (chinetd, lsinetd)
*********** Stop Using the inetd Subsystem (rminetd)
************* NOW (rminetd_now)
************* Next System RESTART (rminetd_boot)
************* BOTH (rminetd_both)
********* inetd Subservers (inetdconf, inetd.conf)
*********** List All inetd Subservers (lsinetdconf)
*********** Add an inetd Subserver (mkinetdconf)
*********** Change / Show Characteristics of an inetd Subserver (chinetdconf, shinetdconf)
*********** Remove an inetd subserver (rminetdconf)
******* syslogd Subsystem (syslogd)
********* Start Using the syslogd Subsystem (stsyslogd)
*********** NOW (stsyslogd_now)
*********** Next System RESTART (stsyslogd_boot)
*********** BOTH (stsyslogd_both)
********* Change/Show Restart Characteristics of syslogd Subsystem (chsyslogd, lssyslogd)
********* Stop Using the syslogd Subsystem (spsyslogd)
*********** NOW (spsyslogd_now)
*********** Next system RESTART (spsyslogd_boot)
*********** BOTH (spsyslogd_both)
******* routed Subsystem (routed)
********* Start Using the routed Subsystem (strouted)
*********** NOW (strouted_now)
*********** Next System RESTART (strouted_boot)
*********** BOTH (strouted_both)
********* Change/Show Restart Characteristics of routed Subsystem (chrouted, lsrouted)
********* Stop Using the routed Subsystem (sprouted)
*********** NOW (sprouted_now)
*********** Next system RESTART (sprouted_boot)
*********** BOTH (sprouted_both)
******* gated Subsystem (gated)
********* Start Using the gated Subsystem (stgated)
*********** NOW (stgated_now)
*********** Next System RESTART (stgated_boot)
*********** BOTH (stgated_both)
********* Change/Show Characteristics of gated Subsystem (chgated, lsgated)
********* Stop Using the gated Subsystem (spgated)
*********** NOW (spgated_now)
*********** Next system RESTART (spgated_boot)
*********** BOTH (spgated_both)
******* named Subsystem (named)
********* Start Using the named Subsystem (stnamed)
*********** NOW (stnamed_now)
*********** Next System RESTART (stnamed_boot)
*********** BOTH (stnamed_both)
********* Change/Show Restart Characteristics of named Subsystem (chnamed, lsnamed)
********* Stop Using the named Subsystem (spnamed)
*********** NOW (spnamed_now)
*********** Next system RESTART (spnamed_boot)
*********** BOTH (spnamed_both)
******* rwhod Subsystem (rwhod)
********* Start Using the rwhod Subsystem (strwhod)
*********** NOW (strwhod_now)
*********** Next System RESTART (strwhod_boot)
*********** BOTH (strwhod_both)
********* Stop Using the rwhod Subsystem (sprwhod)
*********** NOW (sprwhod_now)
*********** Next system RESTART (sprwhod_boot)
*********** BOTH (sprwhod_both)
******* timed Subsystem (timed)
********* Start Using the timed Subsystem (sttimed)
*********** NOW (sttimed_now)
*********** Next System RESTART (sttimed_boot)
*********** BOTH (sttimed_both)
********* Change/Show Restart Characteristics of timed Subsystem (chtimed, lstimed)
********* Stop Using the timed Subsystem (sptimed)
*********** NOW (sptimed_now)
*********** Next system RESTART (sptimed_boot)
*********** BOTH (sptimed_both)
******* portmap Subsystem (information only)
***** PTYs (pty)
******* Change/Show Characteristics of the pty (chgpty)
******* Remove the pty; Keep Definition (rmvpty)
******* Configure the Defined pty (cfgpty)
******* Generate Error Report (errpt)
******* Trace the pty (tpty)
********* Start Trace (trcstart)
********* Stop Trace (trcstop)
********* Generate a Trace Report (trcrpt)
***** Routing (information only) (ruser)
***** Nameserver (information only) (ruser)
***** Arp Tables (information only) (ruser)
*** Manage Print Server (rprint)
***** List all Remote Clients with Print Access (lshostslpd)
***** Add Print Access for a Remote Client (mkhostslpd)
***** Remove Print Access for a Remote Client (rmhostslpd)
***** Start the Print Server Subsystem (mkitab_lpd)
***** Stop the Print Server Subsystem (rmitab_lpd)
***** Show Status of the Print Server Subsystem (statlpd)